Flat Ring Die Pellet Machine 5-6t/H Rice Husk Bamboo Straw For Biomass Press
(1) The biomass briquette machine's body is exquisitely made of ductile cast iron.
(2) Our main motor:Siemens VFD motor.
(3) Small crane is installed for ring die for all pellet press machine .
(4) We use imported bearing and oil seal to ensure high efficiency.
(5) Work time:20 hours without stop.
| Name | Main motor | Capacity | Inner Ring die | Dimension | Total weight |
| SZHL420 | 90KW | 1-1.5T/H | 420MM | 2600*1300*2300MM | 3T |
| SZHL508 | 132KW | 1.5-2T/H | 508MM | 3150*1250*2300MM | 3.5TON |
| SZHL630 | 160KW | 2-2.5T/H | 630MM | 4200*1500*2200 | 10TON |
| SZHL880 | 220KW | 2.5-3.5T/H | 880MM | 4000*2000*2400 | 14TON |
The key point :ring die
1.Material of the ring die: X46Cr13 /4Cr13(stainless steel), 20MnCr5/20CrMnTi (alloy steel) or customized
2. Hardness of ring dies: HRC54-60.
3. Diameter of ring die can do: 1.0mm up to 28mm
4. Pellet die type can do: Ring Die or Flat Die
5. Outer diameter can do: Outer diameter up to 1800mm
6. Pellet Die model we can customize as your specified drawing .
Alloy structural steels, such as 20CrMnTi, 40Cr, 35CrMo, have hardness of heat treatment above HRC50 and good comprehensive mechanical properties. The ring die made of these materials has high strength and good wear resistance, but its shortcoming is poor corrosion resistance. Stainless steel materials are X46Cr13 (German brand), 4Cr13, 3Cr13, etc. These materials are rigid. The hardness of heat treatment is higher than HRC50, and it has good wear resistance and corrosion resistance. It has a long service life.
Our producing base is in Liyang ,Jiangsu ,which is known as town of pellet mill .We have experienced processing equipment and engineer ,for the material ,each chemical ingredients will influence the durability of ring die ,what we used material provided by best and large scale supplier in Liyang called JK forging & machine
Our factory :
Shandong Encke factory is a leading manufacturer of machinery in China devoted to environmental protection, conservation and green energy. Its facility is located in Liyang ,Jiangsu province ,China .Encke manages its own R&D center and for many years has cooperated with a number of external R&D teams at institutions of higher education. After years of development, the company has perfected its processes of design, manufacture, installation, technical training and after sales service.
